 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||
 |
 |
 |
 |
 |
 |
|
|||||||
 |
 |
 |
|
 |
 |
|
|||||||
INDUCED SIGNALS
The test relates to interfering signals that may be generated by interconnected equipment. Induced signal testing is used to determine if equipment will withstand various signals, such as might be introduced by failures in other equipment to which the test unit is connected.
INDUCED SIGNAL SUSCEPTIBILITY
The induced signal susceptibility test determines whether the equipment
and its interconnected circuit configuration will accept a level of induced
voltages caused by the installation environment. The test relates specifically
to interfering signals related to the power frequency and its harmonics,
audio frequency signals, and electrical transients that are generated
by other on-board equipment or systems, and coupled to sensitive circuits
within the equipment under test through its interconnecting wiring.
Induced signal susceptibility testing is specified in the following:
INDUCED VOLTAGE
This test is used to determine if components, for example, transformers
or inductors, have continuous arcing or breakdown of insulation, or any
changes in the input current caused by induced voltages.
Induced voltage testing is specified in the following:
Home About Standards & Specs Equipment & Facilities Contact Related Links Articles Photos Videos ©2004 Aero Nav Laboratories Inc., All Rights Reserved 14-29 112th Street, College Point, NY 11356 Toll Free: 1-800-680-6608 Phone: 718-939-4422 Fax: 718-539-3719