blank blank blank blank blank blank blank blank blank blank blank blank blank blank
Mechanical, Electrical Testing, Environmental Simulation blank
Home About Us Mechanical Testing Electrical Testing Standards and Specs Equipment and Facilities blank
Our Blog
ANL Customer List
blank
Related Links
Blank Resources Blank Contact blank  
  Mechanical Testing
 

ACCELERATION (CENTRIFUGE) testing

The acceleration test is performed on a centrifuge to assure that material can structurally withstand the steady state inertia loads that are induced by platform acceleration, deceleration, and maneuver in the service environment, and can function without degradation during and following exposure to these forces. Acceleration tests are also used to assure that material does not become hazardous after exposure to crash loads. The acceleration test method is applicable to material that is installed in mobile platforms such as aircraft, helicopters, aerospace vehicles, air-carried stores, ground-launched missiles, trains, ships, automotive vehicles, etc.

Acceleration testing is specified in the following:

MIL-STD-202, MIL-STD-750, MIL-STD-810, MIL-E-5272, MIL-P-7788, MIL-M-7969, MIL-F-8615, MIL-S-8805, MIL-A-15303, MIL-E-16400, MIL-T-17301, MIL-F-18327, MIL-E-19100, MIL-S-19500, MIL-C-22437, MIL-B-23071, MIL-L-23886, SAE J-2031, UL-886, UL-1203, US COAST GUARD NO. 493, ISO-2669, SCL-7695, SCL-7722



Home     About     Standards & Specs     Equipment & Facilities     Contact
Related Links     Sitemap    Articles      Photos      Videos

©2004-2014 Aero Nav Laboratories Inc., All Rights Reserved
18 Connor Lane, Deer Park, NY 11729
 Phone: 631-392-4888   Fax: 631-392-4883